Status

This status is based on the progress the freemyipod team has made so far.

	Nano 2G	Nano 3G	Nano 4G	Nano 5G	"Nano" 6G^[1]	Classic 1G	Classic 2G	Classic 3G
Code execution	Yes	Yes	Yes	No^[2]	No^[2]	Yes	Yes	Yes
UART	Yes	Yes	No^[3]	No	No	Yes	Yes	Yes
USB	Yes	Yes	Yes	No	No	Yes	Yes	Yes
iBugger^[4]	Yes	Yes^[5]	Yes	No	No	Yes^[5]	Yes^[5]	Yes^[5]
emBIOS	Yes	No	Yes	No	No	Yes	Yes	Yes
SPI	Unused	Yes	No	No	No	Yes	Yes	Yes
I2C	Yes	Untested^[6]	Yes	No	No	Yes	Yes	Yes
Backlight	Yes	No	Yes	No	No	Yes	Yes	Yes
LCD	Yes	No	Yes	No	No	Partially untested^[7]	Partially untested^[7]	Partially untested^[7]
Piezo	Yes	No	No	No	No	No	No	No
Clickwheel	Yes	Untested^[6]	No	No	No	Yes	Yes	Yes
Audio	Yes	No	No	No	No	Yes	Yes	Yes
NAND/Hard Drive	Yes	No	No	No	No	80GB model only	Untested^[6]	Yes
Power management	Yes	No	No	No	No	No	No	No
Firmware encryption	Yes	Partially	Yes	No	No	Partially	Partially	Partially
Accelerometer	N/A	N/A	Yes	No	No	N/A	N/A	N/A

↑ The "Nano" 6G is something entirely new, that doesn't seem to have much in common with the older generations of the Nano series. We don't yet know how this device works and if we want to do something with it at all.
↑ ^2.0 ^2.1 We need a new exploit to execute code on this device.
↑ UART is not really needed here as we can already access the device via USB.
↑ iBugger is being replaced with emBIOS.
↑ ^5.0 ^5.1 ^5.2 ^5.3 This iBugger version is very limited as we only have access to the SRAM. This is because the bigger SDRAM is not initialized at the time when our exploit is launched. Someone needs to figure out how to initialize it.
↑ ^6.0 ^6.1 ^6.2 Should be similar to the iPod Classic 1G, but wasn't tested on this platform yet.
↑ ^7.0 ^7.1 ^7.2 The code is complete, but was only tested on one of the LCD types that were used in this series yet.

Navigation menu