U-Boot

U-Boot Port

We've been working on an experimental U-Boot port for the iPod nano (2nd generation), iPod nano (3rd generation), iPod nano (5th generation), iPod nano (6th generation) and iPod nano (7th generation). It can be started using wInd3x and will start up a CDC-ACM serial console over USB for debugging purposes. Currently it has no storage driver.

The current port expects to be loaded in place of retailOS, eg. by packaging it into an IMG1 and sending it to WTF. This is what wInd3x does. This way, U-Boot does not have to do any of the 'annoying' early boot stuff like bringing up DRAM.

Getting the source

$ git clone git@github.com:freemyipod/u-boot.git
$ cd u-boot

Configuring

$ make apple_n36_defconfig # iPod nano (2nd generation)
$ make apple_n46_defconfig # iPod nano (3rd generation)
$ make apple_n33_defconfig # iPod nano (5th generation)
$ make apple_n20_defconfig # iPod nano (6th generation)
$ make apple_n31_defconfig # iPod nano (7th generation)

Building

You'll need GCC for ARM (for bare metal targets, not for Linux targets), OpenSSL and GnuTLS.

On Linux distros that use apt, these can be installed using the following command.

# apt install gcc-arm-none-eabi libssl-dev gnutls-dev

Then, build the U-boot binary.

$ make CROSS_COMPILE=arm-none-eabi- u-boot.bin

On macOS, you need to install openssl using homebrew. If the build system does not find it, append the following to the build command:

HOSTCFLAGS="-I/opt/homebrew/Cellar/openssl@3/3.6.1/include" HOSTLDFLAGS="-L/opt/homebrew/Cellar/openssl@3/3.6.1/lib"

substituting your OpenSSL version/path as needed.

Running

If you have a 30-pin breakout cable with the UART pins connected to your computer (for iPod nano (6th generation) and older), or a Alex/DCSD cable (for iPod nano (7th generation)), you can see and interact with U-boot's console. Launch a serial client like picocom before running U-boot. Here is an example command line.

$ picocom --quiet --baud 115200 --imap lfcrlf /dev/ttyUSB0 # or whatever the correct port is

Make sure your user is in the dialout group or similar, so you can access serial ports.

If you have a regular cable, skip this command. USB DFU interface will still be accessible.

iPod nano (2nd generation)

Install Rockbox. Create an u-boot.ipod file by using the following tool from the Rockbox source code:

$ ./rockbox/tools/scramble -add=nn2g u-boot.bin u-boot.ipod

Upload the file to your iPod. Run Rockbox, go to File Manager, find the u-boot.ipod file and select it.

iPod nano (3rd generation), iPod nano (5th generation), iPod nano (6th generation) and iPod nano (7th generation)

Connect your iPod in DFU Mode and use wInd3x to start U-Boot:

$ ./wInd3x cfw run u-boot.bin

Make sure your user can access the raw USB device, add udev rules (recommended) or run with root (not recommended).

The command may fail the first time, retry one or two times before asking for help.

Pushing an image to U-boot

When successfully started, U-Boot will then enumerate as yet another DFU device, this time ready to receive an U-Boot compatible image. You can load an image using dfu-util:

$ dfu-util --device 05ac:8007 --download foo
$ dfu-util --device 05ac:8007 --detach

Note the --detach command: this is needed to get U-Boot to exit DFU mode and actually execute the image.

Make sure your user can access the raw USB device, add udev rules (recommended) or run with root (not recommended).

Work in progress

You can run the iPod nano (5th generation) image on a iPod nano (4th generation) and it seems to be working at first glance.

Your mileage may vary. Patches welcome.

U-boot logs

iPod nano (2nd generation)

<debug_uart>


U-Boot 2025.07-rc4-g116c6099a58f (Jul 31 2026 - 12:47:02 +0300)

CPU:   Samsung S5L8701 (ARM940T)
Model: Apple iPod nano (2nd generation)
DRAM:  32 MiB
Core:  8 devices, 7 uclasses, devicetree: separate
MMC:   
Loading Environment from nowhere... OK
In:    uart@3cc00000
Out:   uart@3cc00000
Err:   uart@3cc00000
Net:   No ethernet found.
Hit any key to stop autoboot:  0 

iPod nano (3rd generation)

<debug_uart>


U-Boot 2025.07-rc4-g116c6099a58f (Jul 31 2026 - 12:47:14 +0300)

CPU:   Samsung S5L8702 (ARM926EJ-S)
Model: Apple iPod nano (3rd generation)
DRAM:  32 MiB
LCD:   Type 38b3 (0)
Core:  8 devices, 7 uclasses, devicetree: separate
MMC:   
Loading Environment from nowhere... OK
In:    uart@3cc00000
Out:   uart@3cc00000
Err:   uart@3cc00000
Net:   No ethernet found.
Hit any key to stop autoboot:  0 

iPod nano (5th generation)

<debug_uart>


U-Boot 2025.07-rc4-g116c6099a58f (Jul 31 2026 - 12:47:25 +0300)

CPU:   Samsung S5L8730 (ARM1176JZF-S)
Model: Apple iPod nano (5th generation)
DRAM:  64 MiB
LCD:   Type 38b3 (0)
Core:  8 devices, 7 uclasses, devicetree: separate
MMC:   
Loading Environment from nowhere... OK
In:    uart@3cc00000
Out:   uart@3cc00000
Err:   uart@3cc00000
Net:   No ethernet found.
Hit any key to stop autoboot:  0 

iPod nano (6th generation)

<debug_uart>


U-Boot 2025.07-rc4-g5a3badf00973 (Aug 09 2026 - 17:57:17 +0300)

CPU:   Samsung S5L8723 (ARM1176JZF-S)
Model: Apple iPod nano (6th generation)
DRAM:  64 MiB
Core:  8 devices, 7 uclasses, devicetree: separate
MMC:   
Loading Environment from nowhere... OK
In:    uart@3cc00000
Out:   uart@3cc00000
Err:   uart@3cc00000
Net:   No ethernet found.
Hit any key to stop autoboot:  0 

iPod nano (7th generation)

<debug_uart>


U-Boot 2025.07-rc4-g116c6099a58f (Jul 31 2026 - 12:47:39 +0300)

CPU:   Samsung S5L8740 (ARM Cortex A5)
Model: Apple iPod nano (7th generation)
DRAM:  64 MiB
Core:  10 devices, 7 uclasses, devicetree: separate
MMC:   
Loading Environment from nowhere... OK
In:    uart@3dd00000
Out:   uart@3dd00000
Err:   uart@3dd00000
Net:   No ethernet found.
Hit any key to stop autoboot:  0