Difference between revisions of "Talk:Todo list"
(→1G/2G/3G Classic HDD-layout) |
|||
| Line 3: | Line 3: | ||
I'm pretty certain there is a HPA/DCO on those drives, and that ATA pw is set . | I'm pretty certain there is a HPA/DCO on those drives, and that ATA pw is set . | ||
:There definitely is no ATA password, and I don't know of an HPA. I'm not even sure if the CE-ATA drive supports HPAs. The hiding of the firmware partition is most likely done by the iPod firmware. --[[User:TheSeven|TheSeven]] 20:04, 15 November 2011 (UTC) | :There definitely is no ATA password, and I don't know of an HPA. I'm not even sure if the CE-ATA drive supports HPAs. The hiding of the firmware partition is most likely done by the iPod firmware. --[[User:TheSeven|TheSeven]] 20:04, 15 November 2011 (UTC) | ||
| + | |||
| + | How ? | ||
| + | Isn't that pretty much what HPA/DCO's where created for ? | ||
| + | Have you verified if there is a HPA/DCO or not ? | ||
| + | |||
| + | ( I don't have the setup to do it myself atm. | ||
| + | Also, I don't know of any tools that reliably can detect a HPA/DCO | ||
| + | over a USB-connection ?) | ||
| + | |||
| + | I see posts on the internets suggesting there IS in fact a HPA/DCO, at least on some models .. | ||
| + | http://forum.hddguru.com/toshiba-apple-ipod-protected-harddrives-t10669-40.html | ||
| + | (Yes, it's for the 5G, I know, but there has to be a reason that you can't just transplant any HDD | ||
| + | with the right interface you like, to an ipod, right ? (And there's only one ipod using CE-ATA AFAIK) ?) | ||
Also, when viewing the physical disk of my emCore'd Classic in win-hex (over USB) there | Also, when viewing the physical disk of my emCore'd Classic in win-hex (over USB) there | ||
| Line 10: | Line 23: | ||
But the disk needs to be connected to a proper controller for any accurate results .. | But the disk needs to be connected to a proper controller for any accurate results .. | ||
:emCORE/Rockbox is a proper controller for that kind of operation. And WinHEX has a lot of problems with non-512 byte sectors, causing it to miscalculate a bunch of sector numbers. --[[User:TheSeven|TheSeven]] 20:04, 15 November 2011 (UTC) | :emCORE/Rockbox is a proper controller for that kind of operation. And WinHEX has a lot of problems with non-512 byte sectors, causing it to miscalculate a bunch of sector numbers. --[[User:TheSeven|TheSeven]] 20:04, 15 November 2011 (UTC) | ||
| + | |||
| + | Or maybe the numbers don't add up because the HPA is there and thus the numbers reported are faked ? | ||
| + | |||
(Why the super-floppy formatting btw ?) | (Why the super-floppy formatting btw ?) | ||
Robert | Robert | ||
:What would a partition table be good for? Superfloppy seems like the straight-forward choice to me. --[[User:TheSeven|TheSeven]] 20:04, 15 November 2011 (UTC) | :What would a partition table be good for? Superfloppy seems like the straight-forward choice to me. --[[User:TheSeven|TheSeven]] 20:04, 15 November 2011 (UTC) | ||
Revision as of 21:35, 22 November 2011
1G/2G/3G Classic HDD-layout
I'm pretty certain there is a HPA/DCO on those drives, and that ATA pw is set .
- There definitely is no ATA password, and I don't know of an HPA. I'm not even sure if the CE-ATA drive supports HPAs. The hiding of the firmware partition is most likely done by the iPod firmware. --TheSeven 20:04, 15 November 2011 (UTC)
How ? Isn't that pretty much what HPA/DCO's where created for ? Have you verified if there is a HPA/DCO or not ?
( I don't have the setup to do it myself atm. Also, I don't know of any tools that reliably can detect a HPA/DCO over a USB-connection ?)
I see posts on the internets suggesting there IS in fact a HPA/DCO, at least on some models .. http://forum.hddguru.com/toshiba-apple-ipod-protected-harddrives-t10669-40.html (Yes, it's for the 5G, I know, but there has to be a reason that you can't just transplant any HDD with the right interface you like, to an ipod, right ? (And there's only one ipod using CE-ATA AFAIK) ?)
Also, when viewing the physical disk of my emCore'd Classic in win-hex (over USB) there is a 120MB entry,listed as "FAT1",
and the technical report complains that " FAT1 < FAT2 " . But the disk needs to be connected to a proper controller for any accurate results ..
- emCORE/Rockbox is a proper controller for that kind of operation. And WinHEX has a lot of problems with non-512 byte sectors, causing it to miscalculate a bunch of sector numbers. --TheSeven 20:04, 15 November 2011 (UTC)
Or maybe the numbers don't add up because the HPA is there and thus the numbers reported are faked ?
(Why the super-floppy formatting btw ?)
Robert
- What would a partition table be good for? Superfloppy seems like the straight-forward choice to me. --TheSeven 20:04, 15 November 2011 (UTC)
