Difference between revisions of "Talk:Todo list"

From freemyipod.org
Jump to: navigation, search
(→‎1G/2G/3G Classic HDD-layout)
 
Line 3: Line 3:
 
I'm pretty certain there is a HPA/DCO on those drives, and that ATA pw is set .
 
I'm pretty certain there is a HPA/DCO on those drives, and that ATA pw is set .
 
:There definitely is no ATA password, and I don't know of an HPA. I'm not even sure if the CE-ATA drive supports HPAs. The hiding of the firmware partition is most likely done by the iPod firmware. --[[User:TheSeven|TheSeven]] 20:04, 15 November 2011 (UTC)
 
:There definitely is no ATA password, and I don't know of an HPA. I'm not even sure if the CE-ATA drive supports HPAs. The hiding of the firmware partition is most likely done by the iPod firmware. --[[User:TheSeven|TheSeven]] 20:04, 15 November 2011 (UTC)
−
 
−
How ?
 
−
Isn't that pretty much what HPA/DCO's where created for ?
 
−
Have you verified if there is a HPA/DCO or not ?
 
−
 
−
( I don't have the setup to do it myself atm.
 
−
Also, I don't know of any tools that reliably can detect a HPA/DCO
 
−
over a USB-connection ?)
 
−
 
−
I see posts on the internets suggesting there IS in fact a HPA/DCO, at least on some models ..
 
−
http://forum.hddguru.com/toshiba-apple-ipod-protected-harddrives-t10669-40.html
 
−
(Yes, it's for the 5G, I know, but there has to be a reason that you can't just transplant any HDD
 
−
with the right interface you like, to an ipod, right ? (And there's only one ipod using CE-ATA AFAIK) ?)
 
  
 
Also, when viewing the physical disk of my emCore'd Classic in win-hex (over USB) there
 
Also, when viewing the physical disk of my emCore'd Classic in win-hex (over USB) there
 
is a 120MB entry,listed as "FAT1",
 
is a 120MB entry,listed as "FAT1",
−
 
 
and the technical report complains that " FAT1 < FAT2 " .
 
and the technical report complains that " FAT1 < FAT2 " .
 
But the disk needs to be connected to a proper controller for any accurate results ..
 
But the disk needs to be connected to a proper controller for any accurate results ..
 
:emCORE/Rockbox is a proper controller for that kind of operation. And WinHEX has a lot of problems with non-512 byte sectors, causing it to miscalculate a bunch of sector numbers. --[[User:TheSeven|TheSeven]] 20:04, 15 November 2011 (UTC)
 
:emCORE/Rockbox is a proper controller for that kind of operation. And WinHEX has a lot of problems with non-512 byte sectors, causing it to miscalculate a bunch of sector numbers. --[[User:TheSeven|TheSeven]] 20:04, 15 November 2011 (UTC)
  
−
Or maybe the numbers don't add up because the HPA is there and thus the numbers reported are faked ?
+
Or maybe the numbers don't add up because the HPA is there and thus the numbers reported are 'faked' ?
  
  

Latest revision as of 21:37, 22 November 2011

1G/2G/3G Classic HDD-layout

I'm pretty certain there is a HPA/DCO on those drives, and that ATA pw is set .

There definitely is no ATA password, and I don't know of an HPA. I'm not even sure if the CE-ATA drive supports HPAs. The hiding of the firmware partition is most likely done by the iPod firmware. --TheSeven 20:04, 15 November 2011 (UTC)

Also, when viewing the physical disk of my emCore'd Classic in win-hex (over USB) there is a 120MB entry,listed as "FAT1", and the technical report complains that " FAT1 < FAT2 " . But the disk needs to be connected to a proper controller for any accurate results ..

emCORE/Rockbox is a proper controller for that kind of operation. And WinHEX has a lot of problems with non-512 byte sectors, causing it to miscalculate a bunch of sector numbers. --TheSeven 20:04, 15 November 2011 (UTC)

Or maybe the numbers don't add up because the HPA is there and thus the numbers reported are 'faked' ?


(Why the super-floppy formatting btw ?) Robert

What would a partition table be good for? Superfloppy seems like the straight-forward choice to me. --TheSeven 20:04, 15 November 2011 (UTC)
Retrieved from "https://freemyipod.org/index.php?title=Talk:Todo_list&oldid=4111"