Working with binaries

GNU ARM toolchain

Working with the ARM platform requires a special toolchain. The GNU ARM toolchain has all the basic tools needed to build and examine software on the iPod.

Obtaining

The GNU ARM toolchain can be downloaded from http://www.gnuarm.com/. You can either download source or binaries. Put the binaries in your system path.

Assembling

arm-elf-as -o test.o test.asm
arm-elf-ld -e 0 -Ttext=0 -o test.elf test.o
arm-elf-objcopy -O binary test.elf test.bin

Disassembling

arm-elf-objdump -bbinary -marmv4 -D test.bin > test.asm

IDA Pro demo

IDA Pro 5.7 paid

This is the best version if you can pay. One of the main advantages over its demo version is that you can save project files.

IDA Pro 5.7 demo

This is the best version if you don't want to pay. It can't save or open binary files, but there is a workaround to opening binaries.

The IDA Pro demo can't open raw ARM files but it can open ELF files. We need to convert the raw binaries to ELF binaries as a workaround. Assuming the input file is called "dump.bin" and the output will be called "dump.elf", run these commands:

arm-elf-objcopy --change-addresses=0xff810000 -I binary -O elf32-littlearm -B arm dump.bin dump.elf
arm-elf-objcopy --set-section-flags .data=code dump.elf

IDA Pro 4.9 freeware

This version is tempting to download but useless since it doesn't support ARM.

Helpful pages

http://chdk.wikia.com/wiki/GPL_Disassembling

http://www.dwelch.com/ipod/