Talk:EmCORE Releases

Nano 2G

So are there instructions to getting this on my 2G nano. I would really like to test this.

Please see here: EmCORE_Installation/iPodNano2G User890104 20:23, 25 May 2011 (UTC)

Voltage reduction on classic

Reducing the CPU core voltage on the iPod Classic has been disabled. Battery life might be adversely affected.

Is it good or bad? (:

In general, this is bad (and should eventually be handled differently) as the CPU now consumes more power than actually necesarry, but for now, it solves problems where it didn't work properly due to a too low voltage. --Benedikt93 13:03, 2 May 2011 (UTC)

Next release

When next release is planned to be out?

When some of the remaining bugs are fixed. User890104 20:23, 25 May 2011 (UTC)

I mean not specific dates but at list some more general info. Like - it'll planned to be out in week or two (: Hoping sound quality bug will be fixed as well... At least a bit. Tnx. Vasyl.

There is no plan. Really. The developers decide to spend their own free time to improve the code, and when there are some major changes, or a serious bug is found and fixed, a release comes out. --User890104 19:21, 18 August 2011 (UTC)

Guys! Any update on this (: Please...

There are automated builds of the current source at builds.freemyipod.org for the impatient, but there aren't so many changes/improvements since the last release, and there are some bugs that aren't fixed yet. So please use the latest release builds, to avoid any issues. --User890104 19:21, 18 August 2011 (UTC)

Sound Quality Improvements

Hey!

Are there any sound quality improvements planned to be done? Maybe some hardware twiks. New ipod chip really sux! I've got some talk with the7 due to this issue, but topic seems to be deleted http://www.freemyipod.org/wiki/Talk:IPod_Classic_iLoader_Installation#iPod_Classic_Sound_Quality

Some interesting material due to this http://homepage.mac.com/marc.heijligers/audio/ipod/comparison/measurements/measurements.html http://www.redwineaudio.com/products/imod

Tnx Vasyl

Sound Update

Hi Vasyl

Good reading info - thanks! I had similar problems (bit of an audiophile meself) but I've used the BioEq libraries: http://www.head-fi.org/wiki/bioeq-rockbox and they work great both with my sennheiser headphones as well as my philips dock. The sound has a natural fullness now, which is improved once you adjust the freq response to the natural response of the speakers.

I'm now running an undervolted ipod classic with emcore r755 (note: the latest rgb666 changes don't work for all ipod6gs apparently - had to comment mine out as rb screens weren't initalising properly) getting 10+ hours off a single charge with great sound.

Hope this helps!

Cheers

jkbuha

Thank u so much Jkbuha!! I'm giving it a try right away!

Vasyl

Okay. Thats installed. I'll try to give it a push with some tweaks, 'cause default settings with native BioEQ didn't impress me much, actually. Jkbuha, i didn't get about EmCORE r755 release, since last build I see on release page is r708: April 24th, 2011. Did I miss smtn? Tnx

Vasyl

Hi Vasyl - try the thrum or throb settings with any decent headgear and you'll see the difference. You may have to modify the freq response a bit to match the dynamic response of your own headphones, but it's way better than the default settings. With regards to r755, you need to build, modify and compile the code yourself off the svn, and you'd most likely need to have some flavour of linux installed as your primary (or virtual) os. If you're not familiar with basic code development it would probably be best to wait until /7 or someone else releases a more updated EmCORE version, ideally with some better lcd and ide handling (my drive groans awfully when seeking long tracks, unlike apple's firmware). But r755 (and r708) are way better than the original apple software!

Cheers jkbuha

Hi Jkbuha. Tnx for your reply. I'm famular a bit with open-source os like linux/unix and with basic code dev since working on IT-field. Will try to give it a push once get a chance. Tnx again!

Vasyl

Last Rockbox Build

Hey! Can last Rockbox build be installed or RB release is tied to the EmCORE release?

I'm not a Rockbox developer, but I personally haven't had any issues using the latest builds: http://download.rockbox.org/daily/ipodclassic/ Obviously you do so at your own risk as with everything else. It would be nice to have a developer confirm this is okay with the latest EmCORE release. Thanks.

Tnx! Will be waiting for developers update

So, could you recommend to use last build from http://download.rockbox.org/daily/ipodclassic/ ?

Since Rockbox on the classics is still flagged as Unusable, there aren't any stable/release builds for these. Your best bet would be using the current build, which is located at http://build.rockbox.org/data/rockbox-ipodclassic.zip (this url always points at the most recent build). And again, these are completely untested, and you run them on your own risk. Be warned! --User890104 19:21, 18 August 2011 (UTC)