EmCORE Installation/iPodClassic/PrepareDFULinux - Revision history

User890104 at 01:23, 9 June 2016

2016-06-09T01:23:03Z

← Older revision		Revision as of 01:23, 9 June 2016
Line 1:		Line 1:
			{{outdated\|reason=emCORE on iPod Classic is DEPRECATED, please use the [https://files.freemyipod.org/~user890104/bootloader-ipodclassic.html Rockbox bootloader] instead.}}

	* Make sure that you have python 2.6 or newer, libusb and [http://sourceforge.net/projects/pyusb/files/PyUSB%201.0/ pyusb >=1.0.0a0] installed		* Make sure that you have python 2.6 or newer, libusb and [http://sourceforge.net/projects/pyusb/files/PyUSB%201.0/ pyusb >=1.0.0a0] installed
	* Download the following files:		* Download the following files:

User890104: change wording

2014-01-28T21:47:36Z

change wording

← Older revision		Revision as of 21:47, 28 January 2014
Line 7:		Line 7:
	* Make sure the hold switch is turned off		* Make sure the hold switch is turned off
	* Press and hold the menu and select buttons for between 10 and 15 seconds - [http://youtu.be/Y_bIDtBohnE click here for a how-to video]. The iPod will show an apple logo after about 5 seconds, keep holding the buttons until it seems to turn off completely The display of your iPod should now stay black.		* Press and hold the menu and select buttons for between 10 and 15 seconds - [http://youtu.be/Y_bIDtBohnE click here for a how-to video]. The iPod will show an apple logo after about 5 seconds, keep holding the buttons until it seems to turn off completely The display of your iPod should now stay black.
	* Run: 'sudo python ipoddfu.py bootstrap-ipodclassic-*.dfu' (If you have multiple python versions installed, make sure that you're using version ~~2.6 or 2.7 and~~ that pyusb is installed into ~~that version~~)		* Run: 'sudo python ipoddfu.py bootstrap-ipodclassic-*.dfu' (If you have multiple python versions installed, make sure that you're using the version that pyusb is installed into)

	Your iPod should now turn on and display "UMSboot." If you run 'sudo fdisk -l' a 64 MB drive will appear without partitions, for example /dev/sdb. Next create a mount point e.g. 'mkdir -p /media/disk' and mount the disk without specifying a file type, e.g. 'sudo mount /dev/sdX /media/disk' where X is the drive letter from the previous step. It's a known issue that Linux might take a long (over 10 min) time to recognize and mount the iPod. If it doesn't (after waiting very long), please ask for [[Contact\|support]].		Your iPod should now turn on and display "UMSboot." If you run 'sudo fdisk -l' a 64 MB drive will appear without partitions, for example /dev/sdb. Next create a mount point e.g. 'mkdir -p /media/disk' and mount the disk without specifying a file type, e.g. 'sudo mount /dev/sdX /media/disk' where X is the drive letter from the previous step. It's a known issue that Linux might take a long (over 10 min) time to recognize and mount the iPod. If it doesn't (after waiting very long), please ask for [[Contact\|support]].

	* [[EmCORE Installation/iPodClassic/UMSboot\|Next step]]		* [[EmCORE Installation/iPodClassic/UMSboot\|Next step]]

User890104: finally fix the python versions mess

2014-01-28T21:46:33Z

finally fix the python versions mess

← Older revision		Revision as of 21:46, 28 January 2014
Line 2:		Line 2:
	* Download the following files:		* Download the following files:
	# [http://svn.freemyipod.org/tools/ipoddfu/ipoddfu.py ipoddfu.py]		# [http://svn.freemyipod.org/tools/ipoddfu/ipoddfu.py ipoddfu.py]
	# ~~'''libipoddfu.py''' for~~ [http://svn.freemyipod.org~~/!svn/bc/788~~/tools/ipoddfu/libipoddfu.py ~~Python '''2.x'''] '''OR''' [http://svn.freemyipod.org/tools/ipoddfu/~~libipoddfu.py ~~Python '''3.x'''~~] ~~(check your Python version with ''python -V'')~~		# [http://svn.freemyipod.org/tools/ipoddfu/libipoddfu.py libipoddfu.py]
	* Download "bootstrap-ipodclassic.dfu" file from the [[emCORE Releases]] page and store it in the same folder		* Download "bootstrap-ipodclassic.dfu" file from the [[emCORE Releases]] page and store it in the same folder
	* Connect the iPod to the computer		* Connect the iPod to the computer

User890104 at 16:35, 30 April 2012

2012-04-30T16:35:46Z

← Older revision		Revision as of 16:35, 30 April 2012
Line 1:		Line 1:
	* Make sure that you have python 2.6 or newer, libusb and [http://sourceforge.net/projects/pyusb/files/PyUSB%201.0/ pyusb >=1.0.0a0] installed		* Make sure that you have python 2.6 or newer, libusb and [http://sourceforge.net/projects/pyusb/files/PyUSB%201.0/ pyusb >=1.0.0a0] installed
	* Download [http://svn.freemyipod.org/tools/ipoddfu/ipoddfu.py ipoddfu.py] ~~and one of the following files, depending on your Python version installed:~~		* Download the following files:
	~~Python~~ '''2.x''': [http://svn.freemyipod.org/!svn/bc/788/tools/ipoddfu/libipoddfu.py ~~libipoddfu.py]<br />~~		# [http://svn.freemyipod.org/tools/ipoddfu/ipoddfu.py ipoddfu.py]
	Python '''3.x''': [http://svn.freemyipod.org/tools/ipoddfu/libipoddfu.py ~~libipoddfu~~.py]		# '''libipoddfu.py''' for [http://svn.freemyipod.org/!svn/bc/788/tools/ipoddfu/libipoddfu.py Python '''2.x'''] '''OR''' [http://svn.freemyipod.org/tools/ipoddfu/libipoddfu.py Python '''3.x'''] (check your Python version with ''python -V'')
	* Download "bootstrap-ipodclassic.dfu" file from the [[emCORE Releases]] page and store it in the same folder		* Download "bootstrap-ipodclassic.dfu" file from the [[emCORE Releases]] page and store it in the same folder
	* Connect the iPod to the computer		* Connect the iPod to the computer

User890104 at 18:32, 1 April 2012

2012-04-01T18:32:22Z

← Older revision		Revision as of 18:32, 1 April 2012
Line 6:		Line 6:
	* Connect the iPod to the computer		* Connect the iPod to the computer
	* Make sure the hold switch is turned off		* Make sure the hold switch is turned off
	* Press and hold the menu and select buttons for ~~about 12~~ seconds. It will ~~start to reboot~~ after 5 seconds, ~~but~~ keep holding the buttons until it seems to ~~power~~ off completely.		* Press and hold the menu and select buttons for between 10 and 15 seconds - [http://youtu.be/Y_bIDtBohnE click here for a how-to video]. The iPod will show an apple logo after about 5 seconds, keep holding the buttons until it seems to turn off completely The display of your iPod should now stay black.
	* Run: 'sudo python ipoddfu.py bootstrap-ipodclassic-*.dfu' (If you have multiple python versions installed, make sure that you're using version 2.6 or 2.7 and that pyusb is installed into that version)		* Run: 'sudo python ipoddfu.py bootstrap-ipodclassic-*.dfu' (If you have multiple python versions installed, make sure that you're using version 2.6 or 2.7 and that pyusb is installed into that version)

User890104 at 10:42, 14 February 2012

2012-02-14T10:42:52Z

← Older revision		Revision as of 10:42, 14 February 2012
Line 1:		Line 1:
	* Make sure that you have python 2.6 or newer, libusb and [http://sourceforge.net/projects/pyusb/files/PyUSB%201.0/ pyusb >=1.0.0a0] installed		* Make sure that you have python 2.6 or newer, libusb and [http://sourceforge.net/projects/pyusb/files/PyUSB%201.0/ pyusb >=1.0.0a0] installed
	* Download [http://svn.freemyipod.org/tools/ipoddfu/ipoddfu.py] and one of the following files, depending on your Python version installed:		* Download [http://svn.freemyipod.org/tools/ipoddfu/ipoddfu.py ipoddfu.py] and one of the following files, depending on your Python version installed:
	Python '''2.x''': [http://svn.freemyipod.org/!svn/bc/788/tools/ipoddfu/libipoddfu.py]<br />		Python '''2.x''': [http://svn.freemyipod.org/!svn/bc/788/tools/ipoddfu/libipoddfu.py libipoddfu.py]<br />
	Python '''3.x''': [http://svn.freemyipod.org/tools/ipoddfu/libipoddfu.py]		Python '''3.x''': [http://svn.freemyipod.org/tools/ipoddfu/libipoddfu.py libipoddfu.py]
	* Download "bootstrap-ipodclassic.dfu" file from the [[emCORE Releases]] page and store it in the same folder		* Download "bootstrap-ipodclassic.dfu" file from the [[emCORE Releases]] page and store it in the same folder
	* Connect the iPod to the computer		* Connect the iPod to the computer

User890104 at 05:14, 29 December 2011

2011-12-29T05:14:48Z

← Older revision		Revision as of 05:14, 29 December 2011
Line 1:		Line 1:
	* Make sure that you have python 2.6 or newer, libusb and [http://sourceforge.net/projects/pyusb/files/PyUSB%201.0/ pyusb >=1.0.0a0] installed		* Make sure that you have python 2.6 or newer, libusb and [http://sourceforge.net/projects/pyusb/files/PyUSB%201.0/ pyusb >=1.0.0a0] installed
	* Download [http://svn.freemyipod.org/tools/ipoddfu/ipoddfu.py] and [http://svn.freemyipod.org/tools/ipoddfu/libipoddfu.py] ([http://svn.freemyipod.org~~/!svn/bc/788~~/tools/ipoddfu/libipoddfu.py~~] for python 2.x) or check out our [[SVN]~~]		* Download [http://svn.freemyipod.org/tools/ipoddfu/ipoddfu.py] and one of the following files, depending on your Python version installed:
			Python '''2.x''': [http://svn.freemyipod.org/!svn/bc/788/tools/ipoddfu/libipoddfu.py]<br />
			Python '''3.x''': [http://svn.freemyipod.org/tools/ipoddfu/libipoddfu.py]
	* Download "bootstrap-ipodclassic.dfu" file from the [[emCORE Releases]] page and store it in the same folder		* Download "bootstrap-ipodclassic.dfu" file from the [[emCORE Releases]] page and store it in the same folder
	* Connect the iPod to the computer		* Connect the iPod to the computer

TheSeven at 16:30, 10 December 2011

2011-12-10T16:30:02Z

← Older revision		Revision as of 16:30, 10 December 2011
Line 1:		Line 1:
	* Make sure that you have python 2.6 or ~~2.7~~, libusb and [http://sourceforge.net/projects/pyusb/files/PyUSB%201.0/ pyusb >=1.0.0a0] installed		* Make sure that you have python 2.6 or newer, libusb and [http://sourceforge.net/projects/pyusb/files/PyUSB%201.0/ pyusb >=1.0.0a0] installed
	* Download [http://svn.freemyipod.org/tools/ipoddfu/ipoddfu.py] and [http://svn.freemyipod.org/tools/ipoddfu/libipoddfu.py] or check out our [[SVN]]		* Download [http://svn.freemyipod.org/tools/ipoddfu/ipoddfu.py] and [http://svn.freemyipod.org/tools/ipoddfu/libipoddfu.py] ([http://svn.freemyipod.org/!svn/bc/788/tools/ipoddfu/libipoddfu.py] for python 2.x) or check out our [[SVN]]
	* Download "bootstrap-ipodclassic.dfu" file from the [[emCORE Releases]] page and store it in the same folder		* Download "bootstrap-ipodclassic.dfu" file from the [[emCORE Releases]] page and store it in the same folder
	* Connect the iPod to the computer		* Connect the iPod to the computer

User890104 at 07:31, 3 November 2011

2011-11-03T07:31:41Z

← Older revision		Revision as of 07:31, 3 November 2011
Line 7:		Line 7:
	* Run: 'sudo python ipoddfu.py bootstrap-ipodclassic-*.dfu' (If you have multiple python versions installed, make sure that you're using version 2.6 or 2.7 and that pyusb is installed into that version)		* Run: 'sudo python ipoddfu.py bootstrap-ipodclassic-*.dfu' (If you have multiple python versions installed, make sure that you're using version 2.6 or 2.7 and that pyusb is installed into that version)

	Your iPod should now turn on and display "UMSboot." If you run 'sudo fdisk -l' a 64 MB drive will appear without partitions, for example /dev/sdb. Next mount the disk without specifying a file type, e.g. 'sudo mount /dev/sdX /media/disk' where X is the drive letter from the previous step. It's a known issue that Linux might take a long (over 10 min) time to recognize and mount the iPod. If it doesn't (after waiting very long), please ask for [[Contact\|support]].		Your iPod should now turn on and display "UMSboot." If you run 'sudo fdisk -l' a 64 MB drive will appear without partitions, for example /dev/sdb. Next create a mount point e.g. 'mkdir -p /media/disk' and mount the disk without specifying a file type, e.g. 'sudo mount /dev/sdX /media/disk' where X is the drive letter from the previous step. It's a known issue that Linux might take a long (over 10 min) time to recognize and mount the iPod. If it doesn't (after waiting very long), please ask for [[Contact\|support]].

	* [[EmCORE Installation/iPodClassic/UMSboot\|Next step]]		* [[EmCORE Installation/iPodClassic/UMSboot\|Next step]]

User890104 at 20:38, 24 October 2011

2011-10-24T20:38:03Z

← Older revision		Revision as of 20:38, 24 October 2011
Line 1:		Line 1:
	* Make sure that you have python 2.6 or 2.7, libusb and pyusb >=1.0.0a0 installed		* Make sure that you have python 2.6 or 2.7, libusb and [http://sourceforge.net/projects/pyusb/files/PyUSB%201.0/ pyusb >=1.0.0a0] installed
	* Download [http://svn.freemyipod.org/tools/ipoddfu/ipoddfu.py] and [http://svn.freemyipod.org/tools/ipoddfu/libipoddfu.py] or check out our [[SVN]]		* Download [http://svn.freemyipod.org/tools/ipoddfu/ipoddfu.py] and [http://svn.freemyipod.org/tools/ipoddfu/libipoddfu.py] or check out our [[SVN]]
	* Download "bootstrap-ipodclassic.dfu" file from the [[emCORE Releases]] page and store it in the same folder		* Download "bootstrap-ipodclassic.dfu" file from the [[emCORE Releases]] page and store it in the same folder